Schneider 140AII33010 Quantum Analog Current Input Module
Manufacturer: Schneider
-
Part Number: 140AII33010
Condition：New with Original Package
Product Type: Analog Input Modules
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
Schneider 140AII33010 Analog Current Input Module
The Schneider 140AII33010 serves as the primary 140AII33010 analog current input module utilized to execute intrinsically safe current signal acquisition across Modicon Quantum automation platforms. It processes eight independent channels while maintaining galvanic separation and rejecting common-mode electrical interference.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 140AII33010 |
| Brand | Schneider Electric |
| Product Line | Modicon Quantum |
| Module Type | Intrinsically Safe Current Input Module |
| Number of Inputs | 8 analog channels |
| Supported Input Ranges | 0 to 20 mA, 0 to 25 mA, 4 to 20 mA |
| Input Impedance | 100 Ohm plus/minus 0.1% |
| Channel-to-Bus Isolation | 2500 VDC for 1 minute |
| Power Dissipation | 7.5 W |
| Operating Temperature | 0 deg C to +60 deg C |
| Net Weight | 0.3 kg |
Backplane Bus Communication and I/O Density Scaling
The module interfaces directly with the Modicon Quantum backplane bus to transfer digitized process values at fixed cyclical scan rates. Internal bus communication utilizes deterministic time slots to guarantee synchronization with the central processing unit. System architecture supports high I/O density scaling, allowing multiple input cards to coexist on the rack without degrading backplane bandwidth or introducing bus arbitration latency.
Frequently Asked Questions
Q: Does the 140AII33010 module support live insertion and removal under power (hot-swapping)?
A: No. Hot-swapping is restricted on Modicon Quantum safety and intrinsically safe racks unless power is completely removed from the backplane slot and connected field wiring to prevent electrical arcing in hazardous areas.
Q: How does the module handle open-circuit field loops in 4-20 mA configurations?
A: The hardware incorporates integrated fault diagnostics that trigger a broken wire status bit when input current drops below operational thresholds, signaling loop failure to the master controller.
Field Installation Guidelines
Ensure the Quantum backplane is securely mounted on a grounded metallic panel prior to card insertion. Route all incoming intrinsically safe analog current loops through dedicated cable ducts separate from high-voltage power cables to minimize electromagnetic coupling. Terminate overall cable shields at the designated chassis grounding bar to maintain common-mode noise rejection. Verify that input signal levels do not exceed internal limiting thresholds before energizing the loop.