Schneider Electric 140ACI03000C Modicon Quantum Input Module
Manufacturer: Schneider
-
Part Number: 140ACI03000C
Condition:New with Original Package
Product Type: Analog Input Modules
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
Schneider Electric 140ACI03000C Modicon Quantum Analog Input Module
The Schneider Electric 140ACI03000C is an 8-channel differential analog input module designed for the Modicon Quantum programmable logic controller (PLC) platform. Equipped with 12-bit analog-to-digital conversion and conformal coating, it acquires standard 1-5 VDC and 4-20 mA process signals while occupying 9 input words in the controller I/O map.
Signal Acquisition and Input Protection
Each of the eight differential channels includes a single-pole low-pass filter with a 15 Hz (+/-20% at -3 dB) cutoff frequency to attenuate high-frequency process noise, updating channels every 5 ms. The inputs withstand continuous overloads up to 50 VDC in voltage mode and 25 mA in current mode, supported by broken-wire and undervoltage fault diagnostics.
Electrical Isolation and Conformal Coating
To prevent ground loops and protect backplane logic, the module provides 1000 VDC channel-to-bus isolation (tested to 3000 VDC for 60 seconds) and 30 VDC channel-to-channel isolation. The C suffix designates factory-applied conformal coating on the printed circuit board assembly, protecting internal circuitry against corrosive atmospheres and humidity.
| Parameter | Specification |
|---|---|
| Model | 140ACI03000C |
| Brand | Schneider Electric |
| Product Series | Modicon Quantum |
| Product Type | Analog Input Module |
| Number of Channels | 8 |
| Input Type | Differential |
| Input Signal Ranges | 1-5 VDC, 4-20 mA |
| Resolution | 12 bits |
| Addressing Requirement | 9 input words |
| Channel Update Time | 5 ms |
| Input Impedance (Voltage) | Greater than 20 Mohm |
| Input Impedance (Current) | 250 ohm +/-0.01% |
| Maximum Overload | 50 VDC (voltage), 25 mA (current) |
| Absolute Accuracy Error | +/-0.05% of full scale |
| Maximum Accuracy Error | +/-0.1% of full scale |
| Linearity Error | +/-0.04% |
| Temperature Drift | +/-0.0025% FS/deg C typical (+/-0.005% FS/deg C max) |
| Common Mode Rejection | Greater than 72 dB at 60 Hz |
| Input Filter | Single-pole low-pass, 15 Hz +/-20% (-3 dB) |
| Isolation (Channel-to-Bus) | 1000 VDC (3000 VDC dielectric test for 60 s) |
| Isolation (Channel-to-Channel) | 30 VDC |
| Fault Detection | Broken wire, undervoltage |
| Bus Current Requirement | 240 mA |
| Power Dissipation | 2 W |
| Status Indicators | Green and red LEDs |
| Special Protection | Conformal coating |
| Mounting Type | Modicon Quantum PLC rack |
| Module Weight | 0.3 kg (Shipping weight: 1.5 kg) |
Frequently Asked Questions
Q: What does the "C" suffix in 140ACI03000C indicate? A: The C suffix indicates that the module is manufactured with conformal coating to protect its internal electronic components in harsh or corrosive industrial environments.
Q: How many input words does the 140ACI03000C require in the PLC memory map? A: This 8-channel module requires 9 input words of I/O addressing space in a Modicon Quantum controller configuration.
Q: What input signal types and fault diagnostics are supported on each channel? A: The module accepts 1-5 VDC and 4-20 mA differential signals and provides built-in detection for broken-wire and undervoltage conditions.