Schneider Electric 170AMM09000 Analog I/O Module
Manufacturer: Schneider
-
Part Number: 170AMM09000
Condition：New with Original Package
Product Type: Analog Input Output Modules
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
Schneider Electric 170AMM09000 Modicon Momentum Mixed Analog I/O Module
The Schneider Electric 170AMM09000, also cataloged as the 170AMM09000 Mixed Analog I/O Module, operates as a dedicated hardware component for mixed analog and discrete signal conversion within Modicon Momentum network architectures. It processes multi-channel analog inputs and drives output loops while maintaining electrical isolation across its internal circuitry.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 170AMM09000 |
| Brand | Schneider Electric |
| Origin | Consult Factory |
| Weight | 0.24 kg |
| Dimensions | 141.5 x 125 x 47.5 mm |
| Operating Temp | 0 to 60 deg C |
| Power Consumption | 6 W max |
| Analog Inputs | 8 differential inputs |
| Analog Input Ranges | +/-10 V, +/-5 V, 0 to 20 mA, 4 to 20 mA, 1 to 5 V |
| Analog Outputs | 4 outputs |
| Analog Output Ranges | +/-10 V, 0 to 20 mA |
Backplane Bus Communication and I/O Density Scaling
The module links directly with the Modicon Momentum backplane bus, transferring digitized process values at high velocities to central controller registers. Engineers maximize I/O density scaling by integrating 8 differential analog inputs, 4 analog outputs, 4 discrete inputs, and 2 discrete outputs into a single physical unit. Furthermore, deterministic network updates and firmware flash compatibility ensure synchronized data exchanges across distributed control nodes without propagation delay.
Frequently Asked Questions
Q: Can the 170AMM09000 be hot-swapped on an active Momentum base?
A: Hot-swapping is prohibited while system power and field loops remain energized, as electrical transients can damage the internal analog conversion circuits. Always disconnect external power prior to module extraction.
Q: How does the module handle open-circuit conditions on 4-20 mA current loops?
A: The internal diagnostic system incorporates built-in wire break detection for active 4-20 mA input channels, flagging loop failures immediately through status indicators and controller registers.
Field Installation Guidelines
Mount the unit securely onto a standard DIN rail or panel base, ensuring that mechanical locking latches engage fully. Route low-voltage analog signal cables separately from high-voltage power conduits to minimize electromagnetic interference and measurement errors. Terminate all cable shields securely to protective earth to preserve signal integrity across the analog loops.