Schneider Electric STBAHI8321KC Modicon STB HART Interface Kit
Schneider Electric STBAHI8321KC Modicon STB HART Interface Kit
Schneider Electric STBAHI8321KC Modicon STB HART Interface Kit
/ 3

Schneider Electric STBAHI8321KC Modicon STB HART Interface Kit

  • Manufacturer: Schneider

  • Part Number: STBAHI8321KC

  • Condition:New with Original Package

  • Product Type: HART Interface Modules

  • Country of Origin: USA

  • Payment:T/T, Western Union

  • Shipping port: Xiamen

  • Warranty: 12 months

Schneider Electric STBAHI8321KC Modicon STB HART Interface Kit

The Schneider Electric STBAHI8321KC is a 4-channel HART interface kit for the Modicon STB distributed I/O system. Acting as a HART multiplexer, it extracts digital device variables, diagnostics, and configuration parameters superimposed on conventional 4-20 mA analog loops. This complete kit bundles the STBAHI8321 interface module with its STBXBA3000 mounting base and STBXTS215018 removable spring-clamp connector.

Technical Specifications

Parameter Specification
Model STBAHI8321KC
Brand Schneider Electric
Product Series Modicon STB
Product Type HART Interface Kit
Included Module STBAHI8321
Included Mounting Base STBXBA3000
Included Terminal Connector STBXTS215018 (removable spring clamp)
Communication Protocol HART
Number of Channels 4 channels
Rated Supply Voltage 24 VDC (19.2 to 30 VDC range)
Logic Bus Current Consumption 400 mA at 5.25 VDC
Channel-to-Channel Isolation Greater than 30 VDC
Input Filter Passive, 3 dB at 25 Hz
Data Format Floating point
Functions Supported Hot swap, virtual placeholder, I/O mapping
Protection Type Reverse polarity protection
Status Indicators 1 green RDY LED, 1 red ERR LED, 4 green/red channel LEDs (CH1 to CH4)
Dimensions (W x D x H) 128.3 mm x 75.5 mm x 27.8 mm
Net Weight 0.11 kg
Operating Temperature 0 to 60 deg C
Storage Temperature -40 to 85 deg C
Relative Humidity 95 %, non-condensing
Certifications UL, CSA, FM Class 1 Division 2, CE

Kit Composition and Ordering Configuration

The KC kit reference provides all three hardware elements required to add a 4-channel HART node to an STB island in one order code:

  • STBAHI8321: The 4-channel HART multiplexer module housing the signal filtering, floating-point data conversion, and status LEDs.
  • STBXBA3000: The standard Modicon STB I/O mounting base that connects the module to the island logic bus and power distribution.
  • STBXTS215018: The removable spring-clamp terminal connector for field loop termination.

Signal Processing and System Diagnostics

Each of the 4 channels passes HART digital signals through a passive 25 Hz filter (3 dB attenuation) while maintaining greater than 30 VDC isolation between channels. Field instrument variables map directly into the island's I/O image in floating-point format and require a HART-enabled Modicon STB network interface module to pass HART frames upstream.

For maintenance and commissioning, the module supports hot swapping, virtual placeholder configuration, and reverse polarity protection. Front-panel diagnostics include a green RDY LED, a red ERR LED, and four bicolor green/red LEDs (CH1 to CH4) for per-channel fault and communication status.

Frequently Asked Questions

Q: What components are included in the Schneider Electric STBAHI8321KC kit? A: The kit includes the STBAHI8321 4-channel HART interface module, the STBXBA3000 mounting base, and the STBXTS215018 removable spring-clamp terminal connector.

Q: Does the STBAHI8321KC support hot swapping on a live Modicon STB island? A: Yes, hot swap operation is supported along with virtual placeholder and I/O mapping functions on the Modicon STB platform.

Q: What network interface module is required to use the STBAHI8321KC? A: It must be paired with a HART-enabled Modicon STB network interface module (NIM) on the island to route HART digital communication to the host control or asset management system.

You may also like