Siemens 6GK1901-1BB10-2AA0 IE FC RJ45 Connector
Manufacturer: Siemens
-
Part Number: 6GK1901-1BB10-2AA0
Condition：New with Original Package
Product Type: Industrial Ethernet Connectors
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
Siemens 6GK1901-1BB10-2AA0 Industrial Ethernet FastConnect Connector
Configured for high-speed signal termination in Industrial Ethernet networks, the Siemens 6GK1901-1BB10-2AA0 (6GK1901-1BB10-2AA0 IE FC RJ45 Plug 90) provides direct physical and electrical execution across Simatic control system interfaces.
Suffix Breakdown & Model Matrix
The part number structure follows the standardized Siemens Industrial Communication nomenclature:
- 6GK1: Communication components and network components (Simatic NET).
- 901: Connection technology and cabling accessories.
- 1BB10: Industrial Ethernet FastConnect RJ45 plug designator with integrated insulation displacement contacts.
- 2AA0: Packaging matrix and execution configuration, designating a 90 deg angled cable outlet supplied in a 10-unit multipack.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 6GK1901-1BB10-2AA0 |
| Brand | Siemens |
| Origin | Germany |
| Weight | 0.35 kg per 10-pack |
| Dimensions | 14 mm x 16 mm x 52 mm (single unit) |
| Operating Temp | -40 deg C to +70 deg C |
| Power Consumption | Passive physical media termination |
| Connection Type | FastConnect cut-and-clamp (IDC) |
| Transmission Rate | 10/100 Mbit/s |
| Cable Compatibility | IE FC TP 2x2 cables (AWG22 solid core) |
| Housing Material | Die-cast zinc alloy metal enclosure |
| Enclosure Rating | IP20 |
Deterministic Industrial Ethernet Connectivity
The 6GK1901-1BB10-2AA0 connector interfaces directly with the Siemens backplane bus and field-level deterministic Ethernet nodes. The dual-pin insulation displacement contacts establish immediate electrical continuity with AWG22 copper conductors without stripping individual wire jackets. By maintaining continuous 360 deg metallic contact through the die-cast housing, the connector suppresses high-frequency electromagnetic noise, preserving frame latency and preventing packet loss on deterministically scheduled Profinet and EtherNet/IP networks.
Frequently Asked Questions
Q: Can this connector be reused after removing it from an existing FastConnect cable?
A: Yes, the integrated insulation displacement contacts support re-termination up to 10 times with standard AWG22 FastConnect cables. Inspect the contact blades for mechanical damage or conductor debris before re-inserting conductors to ensure reliable galvanic contact.
Q: What are the clearance constraints when installing this 90 deg plug into tight cabinet spaces?
A: The 90 deg cable outlet routes the incoming cable parallel to the module front panel, requiring a minimum depth clearance of 35 mm from the RJ45 jack face. This eliminates sharp bend radius stress on the twisted-pair cable conductors within shallow control enclosures.
Field Installation Guidelines
When executing field terminations, cut the Industrial Ethernet FastConnect cable using the dedicated Siemens IE FC stripping tool. Ensure the outer jacket and aluminum shield are stripped to the exact predefined length. Insert the exposed core wires fully into the plug cover color-coded guide. Close the hinged housing shell firmly until the locking latch engages; this action forces the insulation displacement blades through the wire jackets to complete the connection. Maintain proper shield grounding by verifying that the cable braided shield directly contacts the internal metal housing frame. Route cables away from high-voltage AC lines or variable frequency drive output cables to prevent electromagnetic coupling.