Siemens 6GK5004-1BD00-1AB2 SCALANCE XB004-1 Ethernet SwitchSiemens 6GK5004-1BD00-1AB2 SCALANCE XB004-1 Ethernet Switch
Manufacturer: Siemens
-
Part Number: 6GK5004-1BD00-1AB2
Condition：New with Original Package
Product Type: Industrial Ethernet Switches
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
Siemens 6GK5004-1BD00-1AB2 SCALANCE XB004-1 Industrial Ethernet Switch
Configured for unmanaged packet forwarding and optical media conversion in Profinet / EtherNet/IP deterministic networks, the Siemens 6GK5004-1BD00-1AB2 (SCALANCE XB004-1 Industrial Ethernet Switch) provides direct physical/electrical execution.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 6GK5004-1BD00-1AB2 |
| Brand | Siemens |
| Origin | Germany |
| Switch Type | Unmanaged Industrial Ethernet Switch |
| Physical Interfaces | 4 x RJ45 10/100 Mbit/s ports, 1 x SC multimode fiber port (100 Mbit/s) |
| Switching Method | Store-and-forward |
| Supply Voltage | 24 VAC / VDC (supports redundant power input) |
| Power Consumption | 3 W |
| Dimensions | 40 x 125 x 75 mm |
| Weight | 0.3 kg |
| Operating Temp | 0 to +60 deg C |
| Protection Rating | IP20 |
Industrial Networking & Controller Integration
The unmanaged switch processes raw frames using a store-and-forward switching architecture, maintaining backplane bus communication velocity across local Ethernet links. Field engineers deploy the 4 RJ45 ports and single SC fiber connector to scale local I/O density while protecting optical lines against electromagnetic noise. Integrated firmware flash compatibility across SIMATIC automation devices enables transparent plug-and-play routing for Profinet traffic without requiring IP address assignment or managed network setup.
Frequently Asked Questions
Q: Does the 6GK5004-1BD00-1AB2 support redundant power supply connections?
A: Yes, the terminal block provides dual power supply connections for 24 VAC / VDC inputs, allowing backup power supply integration to prevent downtime if one supply fails.
Q: Can maintenance personnel hot-swap RJ45 or SC fiber cables during operation?
A: Field technicians can plug and unplug Ethernet RJ45 cables and SC optical connectors during live system operation without resetting the hardware or affecting adjacent active ports.
Q: What mounting options are supported on the IP20 enclosure?
A: The compact housing snaps directly onto a standard 35 mm DIN rail or mounts flat to an enclosure panel via built-in mounting holes.
Field Installation Guidelines
Installers must mount the IP20 housing inside a grounded control cabinet to protect electronic components from conductive dust and humidity.
- Snap the rear mounting clip onto a standard 35 mm DIN rail until the spring lock latches securely into position.
- Connect dual 24 VDC or 24 VAC power wiring to the terminal block, ensuring tight screw clamping on both primary and redundant feed terminals.
- Attach shielded CAT5e or CAT6 Industrial Ethernet cables to the RJ45 ports, routing lines away from high-voltage motor drive power cables.
- Insert the multimode SC fiber connector into the optical port, keeping the minimum fiber bend radius greater than the cable manufacturer limit to avoid signal attenuation.