Siemens 6GK5005-0BA00-1AA3 SCALANCE X005 Ethernet Switches
Manufacturer: Siemens
-
Part Number: 6GK5005-0BA00-1AA3
Condition：New with Original Package
Product Type: Unmanaged Industrial Ethernet Switches
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
Siemens 6GK5005-0BA00-1AA3 SCALANCE X005 Unmanaged Industrial Ethernet Switch
Configured for unmanaged fast packet switching in industrial local area networks, the Siemens 6GK5005-0BA00-1AA3 (6GK5005-0BA00-1AA3 Unmanaged Fast Ethernet Switch) provides direct physical execution of deterministic point-to-point data transmission between field devices and supervisory control systems.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 6GK5005-0BA00-1AA3 |
| Brand | Siemens |
| Origin | Germany |
| Weight | 0.3 kg |
| Dimensions | 40 x 125 x 75 mm |
| Operating Temp | 0 to +60 deg C |
| Power Consumption | 3 to 4 W |
| Product Type | Unmanaged Industrial Ethernet Switch |
| Ports | 5 x RJ45 (10/100 Mbit/s, Auto-MDI/MDIX) |
| Switching Logic | Store-and-forward |
| Supply Voltage | 24 VDC (Redundant terminal inputs) |
| Mounting Format | Standard 35 mm DIN-rail or wall mount |
| Enclosure Rating | IP20 |
Deterministic Network Backplane & Power Architecture
The module utilizes an integrated hardware-based store-and-forward switching engine that processes incoming frames without added protocol latency or software routing overhead. In high-density PLC and distributed I/O architectures, the internal packet processing mechanism prevents data collisions across all 5 copper RJ45 ports. Dual-circuit redundant 24 VDC power input terminals ensure uninterrupted communication across the internal backplane during primary power supply failure events.
Frequently Asked Questions
Q: Does the switch require software IP configuration or commissioning tools prior to operation?
A: No. The internal ASIC executes hardware-level auto-negotiation and auto-MDI/MDIX detection on all 5 RJ45 interfaces immediately upon power-up without requiring firmware setup or IP assignment.
Q: How does the dual power terminal operate during a single-source outage?
A: The internal power regulation circuit isolates both 24 VDC inputs via blocking diodes. If one supply voltage drops below the minimum threshold, the secondary terminal powers the device without triggering a reset or packet loss.
Field Installation Guidelines
Mount the unit vertically on a standard 35 mm DIN-rail inside an enclosure to maintain passive convection cooling. Maintain a minimum clear distance of 50 mm above and below the housing for adequate thermal dissipation. Ensure the protective earth (PE) connection is firmly bonded to the DIN-rail grounding plane to suppress transient electromagnetic interference (EMI). Route industrial Shielded Twisted Pair (STP) Ethernet cables separately from high-voltage motor or AC power lines to avoid signal cross-talk and maintain link integrity.