Siemens 6XV1830-0JH10 SIMATIC NET PROFIBUS PUR Cable
Manufacturer: Siemens
-
Part Number: 6XV1830-0JH10
Condition：New with Original Package
Product Type: Industrial Ethernet Cables
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
Siemens 6XV1830-0JH10 SIMATIC NET PROFIBUS FC Cable
The Siemens 6XV1830-0JH10, also cataloged as the 6XV1830 Industrial Ethernet Cable, operates as a dedicated hardware component for high-speed PROFIBUS DP data transmission within SIMATIC NET automation architectures. Designed with a 2-core (red and green) solid copper structure (AWG 22 / 0.64 mm), this FastConnect Type A cable features a protective Polyurethane (PUR) outer sheath. Double shielding comprising aluminum foil and tinned copper braiding maintains a characteristic impedance of 150 Ohms across fieldbus network segments.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 6XV1830-0JH10 |
| Brand | Siemens |
| Origin | Germany |
| Weight | 0.078 kg per Meter |
| Dimensions | Outer Diameter 8.0 mm |
| Operating Temp | -30 to +70 deg C |
| Power Consumption | Passive Cable Component (0 W) |
| Cable Type | PROFIBUS FastConnect (Type A) |
| Core Structure | 2-Core (Red/Green Twisted Pair), 0.64 mm Solid Copper |
| Outer Sheath Material | PUR (Polyurethane, Halogen-Free) |
| Shielding | Aluminum Foil + Tinned Copper Braid |
| Characteristic Impedance | 150 Ohms (± 10%) |
| Bending Radius | 65 mm (Static / Fixed), 85 mm (Flexible) |
Siemens Control & Bus Architecture Features
Siemens SIMATIC NET cabling platforms rely on Profinet / EtherNet/IP deterministic networks and PROFIBUS DP protocols to preserve data frame integrity and maintain backplane bus communication velocity Licences across control loops. High I/O density scaling depends on matched 150 Ohm line impedance to eliminate signal reflections and attenuation at rates up to 12 Mbps. Furthermore, firmware flash compatibility across SIMATIC S7 controllers and field nodes enables real-time diagnostic detection of open shield circuits and line resistance faults.
Frequently Asked Questions
Q: Why is a Polyurethane (PUR) sheath specified instead of standard Polyvinyl Chloride (PVC)?
A: PUR provides superior mechanical abrasion resistance and chemical immunity against cutting oils, coolants, and synthetic lubricants. This prevents outer sheath cracking and embrittlement in demanding shop-floor environments where PVC degraded prematurely.
Q: How does the FastConnect (FC) design streamline connector termination on 6XV1830-0JH10?
A: The FC construction maintains rigid radial dimensions between the inner conductors, foil, braid, and outer PUR jacket. Using the Siemens FC Stripping Tool allows technicians to strip all insulation layers to precise lengths in a single mechanical motion.
Q: Is this 6XV1830-0JH10 cable suitable for dynamic continuous-flex drag chain applications?
A: No. As a Type A cable with solid AWG 22 copper conductors, it is designed for fixed or occasionally flexible routing. Continuous-motion applications in C-tracks require Type C trailing cables with stranded wire conductors to prevent metal fatigue.
Field Installation Guidelines
Prepare cable ends using the Siemens FastConnect stripping tool adjusted for 8.0 mm PUR cable outer diameters. Execute a single rotary cut to remove the outer PUR jacket and inner shielding foil, exposing the solid 0.64 mm copper cores at exact stripping lengths for direct insertion into FastConnect DB9 or M12 fieldbus plugs.
Maintain a minimum static bending radius of 65 mm for fixed runs and 85 mm for flexible installation paths. Avoid overtightening cable ties, which can deform the outer PUR jacket and distort the 150 Ohm characteristic impedance. Clamp the tinned copper braid 360 degrees to the cabinet ground bar using low-impedance grounding clamps to route high-frequency electrical noise directly to earth ground.