Siemens 6XV1875-5CH50 SIMATIC NET 5m IWLAN Cable
Manufacturer: Siemens
-
Part Number: 6XV18755CH50
Condition：New with Original Package
Product Type: Coaxial RF Antenna Cables
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
Siemens 6XV1875-5CH50 SIMATIC NET IWLAN Coaxial Cable
The Siemens 6XV1875-5CH50, also cataloged as the 6XV1875 Coaxial RF Antenna Cables, operates as a dedicated hardware component for high-frequency radio signal transmission between IWLAN access points and remote antennas within SIMATIC NET industrial wireless networks. Pre-assembled at a length of 5.0 meters, this 50 Ohm coaxial cable features an N-Connect male connector on one end and an RP-SMA male connector on the opposite end. Supporting operational frequencies from 0 GHz to 6 GHz, it maintains precise signal power across both 2.4 GHz and 5.8 GHz bands.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 6XV1875-5CH50 |
| Brand | Siemens |
| Origin | Germany |
| Weight | 0.35 kg |
| Dimensions | 5.0 Meters (16.4 ft) Length |
| Operating Temp | -40 to +80 deg C |
| Power Consumption | Passive RF Component (0 W) |
| Characteristic Impedance | 50 Ohms |
| Frequency Range | 0 GHz to 6 GHz |
| Attenuation @ 2.4 GHz | 0.53 dB per meter |
| Attenuation @ 5.8 GHz | 0.89 dB per meter |
| Protection Rating | IP68 (When Mated) |
| Connectors | N-Connect Male to RP-SMA Male |
Siemens Control & Bus Architecture Features
Siemens SIMATIC NET IWLAN interconnectivity hardware relies on deterministic Profinet / EtherNet/IP wireless protocols to ensure real-time data frame transport across high-density I/O configurations. High I/O density scaling relies on low-loss RF path characteristics to prevent packet retries and keep backplane bus communication velocity Licences within operational thresholds. Furthermore, firmware flash compatibility within SCALANCE W access points and client modules enables automatic diagnostic reporting of RF signal attenuation without manual network recalibration.
Frequently Asked Questions
Q: What are the exact attenuation losses over the entire 5.0 meter cable length at 2.4 GHz and 5.8 GHz?
A: Signal attenuation totals approximately 2.65 dB across the full 5.0 meter span at 2.4 GHz (0.53 dB/m) and approximately 4.45 dB at 5.8 GHz (0.89 dB/m). These values must be factored into the overall link budget calculation during network engineering.
Q: How does the IP68 ingress protection rating function at the connector interfaces?
A: Ingress protection reaching IP68 relies on internal elastomeric sealing rings and threaded coupling mechanisms on both the N-Connect male and RP-SMA male ends. This prevents moisture, oil, and dust ingress when torqued to specified mating limits.
Q: Is this coaxial assembly compatible with non-Siemens antenna hardware?
A: Yes. The assembly connects to any third-party RF equipment providing standard N-type female antenna ports and RP-SMA female radio interfaces, provided system impedance remains matched at 50 Ohms.
Field Installation Guidelines
Route the coaxial cable along structured cable trays or enclosure channels, maintaining a minimum dynamic bend radius of 50 mm to avoid crushing the internal dielectric insulation. Secure the cable with non-metallic zip ties spaced every 300 mm to prevent tension loads on the connector crimp sleeves during cabinet vibration.
Align the N-Connect male plug and RP-SMA male plug squarely with their corresponding panel receptacles before threading. Hand-tighten the RP-SMA connector to 0.6 Nm using a torque wrench, and torque the N-Connect threaded coupling to 1.0 to 1.5 Nm. Apply self-amalgamating silicone weatherproofing tape over outdoor N-Connect junctions to protect exposed metal threading against atmospheric corrosion.