Siemens SCALANCE WAM766-1 Industrial IWLAN Access Point
Manufacturer: Siemens
-
Part Number: 6GK5766-1GE00-7DA0
Condition：New with Original Package
Product Type: Industrial Wireless LAN Access Points
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
Siemens SCALANCE WAM766-1 Industrial IWLAN Access Point
Configured for deterministic wireless packet routing and high-density industrial data exchange within automation network platforms, the Siemens SCALANCE WAM766-1 (6GK5766-1GE00-7DA0) (SCALANCE WAM766-1 Industrial IWLAN Access Point) provides direct physical and electrical execution. It processes IEEE 802.11ax Wi-Fi 6 radio transmissions across dual-band 2.4 GHz and 5 GHz spectrums via dual N-Connect antenna interfaces and an M12 Gigabit Ethernet port.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | SCALANCE WAM766-1 |
| Brand | Siemens |
| Origin | Germany |
| Weight | 1.1 kg |
| Dimensions | 200 x 150 x 60 mm |
| Operating Temp | -30 deg C to +60 deg C |
| Power Consumption | 15 W maximum |
| Supply Voltage | Redundant 24 V DC (M12 L-coded) or PoE |
| Wireless Standard | IEEE 802.11ax (Wi-Fi 6) |
| Maximum Data Rate | Up to 1201 Mbit/s (gross) |
| Ethernet Interface | 1 x M12, 10/100/1000 Mbps |
| Protection Rating | IP65 |
Profinet / EtherNet/IP Deterministic Networks and Firmware Compatibility
The module executes deterministic wireless communication by utilizing advanced iFeatures and Client License Pool capabilities to minimize latency across industrial networks. Firmware flash compatibility is maintained through managed configuration interfaces, allowing seamless integration with established Profinet and EtherNet/IP architectures. Furthermore, the unit scales its backplane bus communication velocity and packet handling parameters dynamically to support high-density field device deployments without packet loss.
Frequently Asked Questions
Q: Does the unit support redundant power supply configurations?
A: Yes, the hardware supports redundant 24 V DC power inputs via M12 L-coded connectors alongside Power over Ethernet (PoE) options.
Q: Can the M12 Ethernet and antenna cables be hot-swapped during active system operation?
A: No, disconnecting data lines or antenna connections while energized can cause electrical arcing and interface degradation; power must be isolated prior to maintenance.
Q: What level of environmental protection does the enclosure provide?
A: The device features an IP65-rated housing designed for cabinet-free direct outdoor and harsh industrial floor installations.
Field Installation Guidelines
- Mount the unit securely onto a flat surface or structural bracket in a cabinet-free field location, ensuring adequate ambient airflow around the IP65 enclosure to maintain operating temperatures within the -30 deg C to +60 deg C range.
- Connect the redundant 24 V DC power supply or PoE cable using M12 L-coded connectors, verifying correct voltage polarity and shield continuity before energizing.
- Attach approved external antennas to the N-Connect ports, routing coaxial cables away from high-voltage power conduits and heavy variable-frequency drives to reduce electromagnetic interference.
- Terminate shielded industrial Ethernet cables into the M12 Gigabit port, ensuring proper ground bonding of the cable shield to prevent ground loops and protect against voltage surges.