Speedtronic RTD Input Terminal Board | GE IS200TRTDH1DCB
Manufacturer: GE Fanuc
-
Part Number: IS200TRTDH1DCB
Condition：New with Original Package
Product Type: Terminal Boards
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
GE IS200TRTDH1DCB Mark VI RTD Input Terminal Board
The GE IS200TRTDH1DCB, also cataloged as the IS200TRTD RTD Input Terminal Board, operates as a dedicated hardware component for temperature monitoring within Mark VI Speedtronic Turbine Control System platforms. Configured for collecting temperature signals from turbine bearings, windings, and exhaust paths, the GE IS200TRTDH1DCB (IS200TRTD RTD Input Terminal Board) provides direct physical/electrical execution.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IS200TRTDH1DCB |
| Brand | General Electric (GE) |
| Origin | USA |
| Weight | 1.3 kg |
| Dimensions | 8.26 cm x 4.19 cm x 12.1 cm |
| Operating Temp | -20 to +70 deg C |
| Power Consumption | Passive backplane loop powered |
| Input Channels | 8 RTD channels (3-wire configuration) |
| Supported RTD Types | Platinum (100 Ohm), Nickel (120 Ohm), Copper (10 Ohm) |
| Measurement Range | -40 to +200 deg C (depending on RTD type) |
| Accuracy | +/- 1 deg C typical |
| Noise Suppression | Built-in filtering for signal transmission |
| Terminal Type | Barrier-type with removable strips |
| Configuration | Single-channel operation (simplex systems) |
| Storage Temperature | -40 to +85 deg C |
Industrial Control and Deterministic Network Operations
The control hardware employs specialized backplane bus communication velocity parameters to synchronize multi-rack system Topologies. Deterministic data transmission over industrial networks utilizes embedded Profinet or EtherNet/IP protocols to execute time-critical synchronization routines. Firmware flash compatibility rules require consistent microcode versions across both active and redundant backup processing nodes. The hardware layer enforces physical network isolation through dedicated MAC addressing structures, managing high I/O density scaling profiles without degradation of standard cyclic task schedules or execution jitter loops.
Frequently Asked Questions
Q: How does the hardware maintain signal integrity across long 3-wire RTD runs?
A: The board incorporates dedicated on-board electrical filtering and noise suppression circuits to stabilize micro-voltage inputs against electromagnetic interference before passing the data to the controller backplane.
Q: Can the wiring sub-assembly be disconnected without removing individual field wires?
A: Yes, the unit utilizes removable barrier-type terminal strips, allowing field engineers to swap out the underlying board module quickly during maintenance loops without rewiring the terminal connection blocks.
Field Installation Guidelines
Mount the terminal board firmly inside the designated Mark VI rack chassis using the integrated mounting locations. Grounding infrastructure dictates that technicians maintain clean, uninsulated metal contact between the board frame and the system enclosure backplate to prevent floating potentials. Terminate all sensor cabling at the removable barrier blocks using standard 3-wire industrial practices to compensate for lead-wire resistance variables. Route low-level RTD signal cables away from AC power bus lines or switching inductive loads to mitigate noise induction across the internal filter pathways. Secure all terminal screws to the recommended mechanical torque specification to prevent intermittent contact failure points.