TSXDSZ08T2 Schneider Modicon TSX Micro 8 Output DC Module
Manufacturer: Schneider
-
Part Number: TSXDSZ08T2
Condition:New with Original Package
Product Type: Discrete Output Modules
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
Schneider Electric TSXDSZ08T2 Modicon TSX Micro Discrete Output Module
The Schneider Electric TSXDSZ08T2 is an 8-channel, 24 VDC solid-state discrete output module for the Modicon TSX Micro automation platform. It uses positive logic transistor outputs with screw terminal connections to switch 24 VDC field loads such as solenoid valves, contactors, and indicator lamps. Built-in protection circuits guard each output against overvoltage, short circuits, overcurrent, and supply polarity reversal.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | TSXDSZ08T2 |
| Brand | Schneider Electric |
| Product Series | Modicon TSX Micro |
| Product Type | Discrete Output Module |
| Number of Outputs | 8 channels |
| Output Type | Solid-state transistor, positive logic |
| Connection Type | Screw terminal block |
| Rated Output Voltage | 24 VDC |
| Output Voltage Limits | 19 to 30 VDC |
| Rated Output Current | 0.5 A per channel |
| Maximum Output Current | 0.625 A |
| Maximum Leakage Current | 0.5 mA at state 0 |
| Residual Voltage | 0.3 V |
| Minimum Ohmic Load Impedance | 48 Ohm |
| Response Time | Less than 0.5 ms at state 1 and state 0 |
| Switching Frequency | Less than 0.6 / (L * I^2) Hz |
| Parallel Output Operation | Up to 2 outputs maximum |
| Output Overvoltage Protection | Zener diode |
| Output Short-Circuit Protection | Thermal circuit breaker and current limiter |
| Reverse Polarity Protection | Reverse diode on power supply |
| Current Consumption | 38 mA |
| Power Dissipation | 3.5 W per module, 0.15 W per channel |
| Isolation Voltage | 1500 V for 1 s |
| Net Weight | 0.24 kg |
Output Characteristics and Load Limits
Each solid-state channel switches positive 24 VDC within an operating voltage window of 19 to 30 VDC. When off (state 0), leakage current remains up to 0.5 mA, and on-state residual voltage is 0.3 V, keeping voltage drop across field wiring low.
Sub-0.5 ms switching response on both transitions supports fast digital control cycles, while actual switching rate depends on load inductance and current according to the rated formula. A minimum ohmic load impedance of 48 Ohm aligns with the 0.5 A nominal rating at 24 VDC, and up to 2 outputs can be paralleled when higher load current is required.
Circuit Protection and Thermal Rating
Each output integrates a Zener diode for overvoltage clamping alongside a current limiter and thermal circuit breaker for short-circuit and overload protection. A reverse diode on the power supply protects against accidental polarity reversal, and 1500 V isolation for 1 s separates circuits under specified test conditions.
Total module power dissipation is 3.5 W, with 0.15 W dissipated per channel and 38 mA current consumption. Maintenance teams should account for total heat dissipation inside the Modicon TSX Micro enclosure when multiple I/O modules operate simultaneously.
Frequently Asked Questions
Q: Can two output channels on the TSXDSZ08T2 be wired in parallel to drive a larger load?A: Yes, up to 2 outputs maximum can be paralleled under supported operating conditions. Verify total load current and derating limits before combining channels in field wiring.
Q: What protection features are built into the TSXDSZ08T2 outputs and power supply?A: Output overvoltage is protected by a Zener diode, and short circuits are handled by a thermal circuit breaker and current limiter. Power supply reverse polarity is protected by a reverse diode.
Q: How do field devices connect to the TSXDSZ08T2?A: Field wiring terminates at an 8-point screw terminal block on the module. Check terminal assignments and 19 to 30 VDC supply limits prior to commissioning.