VE4050E1C0 Emerson Digital Input Module | New & Original Stock
VE4050E1C0 Emerson Digital Input Module | New & Original Stock
VE4050E1C0 Emerson Digital Input Module | New & Original Stock
/ 3

VE4050E1C0 Emerson Digital Input Module | New & Original Stock

  • Manufacturer: GE Fanuc

  • Part Number: VE4050E1C0 KJ4001X1-BE1

  • Condition:New with Original Package

  • Product Type: Digital Input Modules

  • Country of Origin: USA

  • Payment:T/T, Western Union

  • Shipping port: Xiamen

  • Warranty: 12 months

Emerson VE4050E1C0 DeltaV Digital Input Module

Configured for discrete on/off signal acquisition within Emerson DeltaV DCS platforms, the Emerson VE4050E1C0 (KJ4001X1-BE1 Digital Input Module) provides direct physical/electrical execution. The hardware serves as the primary scanning interface that inputs status variations from 32 distinct field devices, translates those electrical signals into digital words, and passes the parsed data arrays upstream via the system logic backplane.

Hardware Specifications

Parameter Specification
Model KJ4001X1-BE1
Assembly Code VE4050E1C0
Brand Emerson
Origin USA
Weight 0.95 kg
Dimensions 300 mm x 100 mm x 60 mm
Operating Temp -40 to +70 deg C
Power Consumption LocalBus: 12 VDC at 150 mA; Bussed Field Power: 12 VDC at 300 mA
Number of Channels 32 digital input channels
Signal Type Discrete (on/off)
Nominal Input Voltage 24 VDC
Input Current ~7 mA per channel
Field Circuit Rating 24 VDC at 32 mA
Module Capacity 8 I/O modules per carrier
Humidity Range 5% to 95% non-condensing
Certifications CE, UL, ATEX, CSA, IECEx

Process Control and DCS Instrumentation Attributes

The 32-channel input architecture implements high-density channel-to-channel isolation parameters to prevent external stray voltages or field ground loops from disrupting the logic processing core. The internal optocoupler circuitry establishes a secure barrier against voltage transients, suppressing high-frequency industrial noise that could otherwise corrupt parallel 4-20 mA HART loop protocol lines or sensitive low-voltage instrumentation networks. Additionally, the integrated ground plane and terminal bonding layouts maintain absolute structural thermal equilibrium across the backplane slots.

Frequently Asked Questions

Q: What are the backplane current limitations during full 32-channel scanning operations?

A: The VE4050E1C0 draws a maximum logic-side current of 150 mA from the 12 VDC LocalBus rail, alongside a continuous load demand of 300 mA at 12 VDC from the bussed field power plane.

Q: Is online hot-swapping permitted for this high-density module?

A: The physical module supports removal and insertion while the carrier bus is energized. However, executing hot-swaps inside active ATEX/IECEx Zone 2 hazardous areas is restricted unless the field loops are isolated or verified as non-incendive to mitigate arcing risks.

Q: How are the discrete field inputs electrically grouped inside this module?

A: The 32 digital input channels utilize centralized power routing and standardized bus connections shared uniformly across the internal carrier slot matrix, pulling approximately 7 mA per channel under nominal 24 VDC active states.

Field Installation Guidelines

  • Carrier Engagement and Alignment: Align the module frame with the specific guides on the DeltaV terminal carrier plate. Firmly push until the backplane connectors link smoothly with the bus, then verify that the mechanical locking mechanisms are fully latched.
  • Shielding and Common Grounding: Route all field switch lines utilizing proper shielded twisted-pair cabling. Connect individual cable shields to the dedicated marshalling ground bar at a single reference point to prevent circulating currents from introducing signal noise.
  • Conduit Separation Rules: Keep all low-voltage 24 VDC discrete wiring in wire ways that are physically isolated from heavy alternating current (AC) power grids, relay loops, or motor drive outputs to minimize electromagnetic induction.
  • Hazardous Environment Checks: Prior to commissioning in Class I Division 2 locations, verify that all external field supply loops operate within the rated 24 VDC at 32 mA parameter envelope to maintain safe operations.
You may also like