VE4055S2C0 Emerson Vertical Carrier | New & Original Stock
Manufacturer: Emerson
-
Part Number: VE4055S2C0
Condition：New with Original Package
Product Type: DCS Baseplates and Carriers
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
Emerson VE4055S2C0 DeltaV Vertical Carrier
The Emerson VE4055S2C0, also cataloged as the Emerson VE4055S2C0 Right 8-Wide Vertical Carrier, operates as a dedicated hardware component for structural support and electrical routing within Emerson DeltaV Distributed Control System platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | VE4055S2C0 |
| Brand | Emerson |
| Origin | USA |
| Weight | 0.6 to 0.8 kg |
| Dimensions | 107 mm x 41 mm x 105 mm |
| Operating Temp | -40 to +70 deg C |
| Storage Temp | -40 to +85 deg C |
| Humidity Range | 5% to 95%, non-condensing |
| Product Type | Right 8-Wide Vertical Carrier |
| System Compatibility | DeltaV DCS |
| Mounting Orientation | Vertical |
| Module Capacity | 8 I/O modules |
| Material | Industrial-grade composite/plastic |
| Power Consumption | Base backplane draw only (dependent on attached load cards) |
| Certifications | CE, COO |
Process Control and DCS Instrumentation Features
The carrier implements dedicated signal routing and channel-to-channel isolation safeguards when interfacing with active I/O electronics. It incorporates physical provisions for 4-20 mA HART loop protocol pass-through, maintaining signal integrity across the internal bus structure. To mitigate high-frequency interference across adjacent channels, the backplane circuit architecture features optimized trace separation, minimizing potential channel-to-channel crosstalk during multi-variable analog data acquisition.
Frequently Asked Questions
Q: What is the maximum physical module capacity supported by the carrier?
A: The hardware architecture accommodates a maximum configuration of 8 side-by-side I/O modules on a single carrier assembly.
Q: Are there specific installation restrictions regarding orientation?
A: Yes. The structural layout and ventilation paths require direct vertical mounting inside the enclosure or control cabinet to maintain specified operational performance.
Q: Does the carrier provide integrated local power conversion?
A: No. The unit acts as a passive distribution and routing backplane, directing bulk system power and communication lines to the individual active I/O modules.
Field Installation Guidelines
- Mounting Alignment: Ensure the carrier is securely attached to the vertical DIN rail or backpanel using standard mounting hardware to prevent mechanical stress on internal bus connections.
- Wiring and Routing: Maintain separate routing paths for high-voltage power lines and low-voltage 4-20 mA signal wires to prevent electrical noise coupling.
- Grounding Protocols: Connect the carrier ground point to the main system instrument ground bus using a low-impedance copper conductor.
- Thermal Management: Leave adequate clearance at the top and bottom of the vertical assembly to enable unobstructed convection cooling within the cabinet.