{"product_id":"woodward-8280-300-protech-gii-overspeed-protection-module","title":"Woodward 8280-300 ProTech-GII Overspeed Protection Module","description":"\u003ch2\u003eWoodward 8280-300 ProTech-GII Overspeed Protection Module\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eWoodward 8280-300\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e8280-300\u003c\/strong\u003e ProTech-GII Overspeed Protection Module, operates as a dedicated hardware component for turbine speed monitoring and emergency trip execution within prime mover safety platforms. The system continuously processes high-frequency pulses from active or passive magnetic pickup sensors positioned along the rotating shaft. Upon detecting a rotational velocity that crosses preconfigured safety thresholds, internal output relays trigger instantly to drive electro-hydraulic trip valves or breaker circuits, executing emergency shutdown routines independent of the main process governor.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e8280-300\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eWoodward\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eStandard Chassis Weight (Ref. Documentation)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e330 mm x 486 mm x 153 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-40 to +85 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e24 VDC nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eProTech-GII Overspeed Protection Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eArchitecture\u003c\/td\u003e\n\u003ctd\u003eTriple Modular Redundancy (TMR) 2oo3 voting logic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensor Interface\u003c\/td\u003e\n\u003ctd\u003eActive or passive magnetic pickup (MPU) inputs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Relays\u003c\/td\u003e\n\u003ctd\u003eHigh-speed trip outputs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure Rating\u003c\/td\u003e\n\u003ctd\u003eIP56 dust and water resistant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Humidity\u003c\/td\u003e\n\u003ctd\u003e5-95% non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eThermal Dissipation and Actuator Loop Feedback Dynamics\u003c\/h3\u003e\n\u003cp\u003eIntegrated high-speed input channels digitize incoming speed sensor signals while maintaining rapid actuator loop feedback response timing to isolate overspeed transients before structural stress occurs. In addition, internal watchdog hardware continually monitors execution routines to maintain module health. Passive thermal heat sink dissipation profiles efficiently transfer internal operational heat through the rear of the IP56 enclosure, allowing continuous processing without active cooling fans in high-ambient industrial spaces.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: How does the internal 2oo3 voting logic process a failure within one processing channel?\u003c\/p\u003e\n\u003cp\u003eA: The Triple Modular Redundancy (TMR) architecture operates across three isolated internal modules. If a single channel experiences a hardware fault or loses its speed sensor input signal, the module generates a diagnostic fault alarm while the remaining two functional channels continue executing accurate speed measurement and trip enforcement.\u003c\/p\u003e\n\u003cp\u003eQ: What grounding procedure prevents electrical noise from interfering with the magnetic pickup inputs?\u003c\/p\u003e\n\u003cp\u003eA: Field technicians must route all MPU wiring in dedicated metallic conduit and ground the cable drain shield exclusively at the module PE grounding terminal. Leaving the sensor-end shield ungrounded avoids potential ground loops that could distort low-voltage pulse inputs.\u003c\/p\u003e\n\u003cp\u003eQ: What mounting orientation ensures proper convective cooling for the chassis?\u003c\/p\u003e\n\u003cp\u003eA: Mount the chassis vertically against a flat bulkhead frame to allow natural upward convective airflow over the rear heat sink fins. Maintain a clearance of at least 100 mm on all sides to prevent heat entrapment.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cp\u003eSecure the module vertically to an unyielding, flat bulkhead support structure using four M8 mounting fasteners. Maintain at least 100 mm of unhindered clearance around the IP56 enclosure to allow natural thermal convection across the rear cooling surfaces. Run all magnetic pickup sensor cables through dedicated, shielded metallic conduit kept physically isolated from high-voltage AC lines or motor power cabling.\u003c\/p\u003e\n\u003cp\u003eEstablish a low-impedance ground bond by connecting a stranded copper conductor (minimum 4 mm sq) directly from the chassis ground stud to the central panel earth bus bar. Strip all field wiring ends to specified insertion lengths before securing terminal screw clamps to minimize contact resistance. Always confirm power source polarity and verify stable 24 VDC delivery before energizing the module.\u003c\/p\u003e","brand":"Woodward","offers":[{"title":"Default Title","offer_id":43907241508963,"sku":"8280-300","price":310.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0583\/5246\/8067\/files\/47_5f349a87-adfc-44cb-836b-afbf8d9d237d.jpg?v=1766468535","url":"https:\/\/www.autocontrolglobal.com\/products\/woodward-8280-300-protech-gii-overspeed-protection-module","provider":"AutoControl Global","version":"1.0","type":"link"}