Yokogawa ADV569-P00 CENTUM FIO Digital Output Module
Manufacturer: Yokogawa
-
Part Number: ADV569
Condition：New with Original Package
Product Type: Digital Output Modules
-
Country of Origin: Japan
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
Yokogawa ADV569-P00 Digital Output Module
Configured for high-density discrete switching in Yokogawa CENTUM VP systems, the Yokogawa ADV569-P00 (ADV569 Digital Output Module) provides direct physical/electrical execution. The hardware manages 64 isolated transistor contact outputs with integrated pulse-width and time-proportional control across ST7-compatible FIO backplane architectures.
Suffix Breakdown & Model Matrix
| Code | Type | Description |
|---|---|---|
| ADV569 | Base Model | Digital Output Module for Compatible ST7 (64-channel output, Isolated) |
| -P | Output Function | With pulse width function / time-proportional output function |
| 0 | Fixed Code | Always set to 0 |
| 0 | Option Type | Basic type without specific hardware additions |
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | ADV569-P00 |
| Brand | Yokogawa |
| Origin | Japan |
| Weight | 0.3 kg (Shipping: 2 kg) |
| Dimensions | Standard Yokogawa FIO Module Dimensions |
| Operating Temp | 0 to 60 deg C |
| Power Consumption | Max. 800 mA at 5 VDC |
| Channel Count | 64 digital outputs |
| Channel Grouping | Common minus side every 16 channels |
| Output Contact Rating | 30 VDC, 100 mA |
| Load Type Compatibility | Resistive and inductive loads |
| Response Time | 16 ms or less |
| Pulse Width Range | 8 ms to 7200 s (Resolution: 8 ms) |
| External Cable Connection | Dedicated KS9 cable |
| System Compatibility | Yokogawa CENTUM VP / FIO System (ST7 compatible) |
HART Protocol & Digital Field Signal Isolation
The module provides galvanic isolation between field terminal loops and internal system backplane logic to isolate electrical transients. While standard 4-20 mA HART loop protocol devices interface with analog sub-nodes, discrete field actuators connected to the ADV569-P00 benefit from common-minus isolation across 16-channel banks. This circuit design limits cross-channel interference and maintains stable state execution across all 64 output channels under high switching frequencies.
Frequently Asked Questions
Q: How does the pulse-width function on the ADV569-P variant operate?
A: The pulse-width function enables time-proportional driving of discrete actuators over a configurable duration from 8 ms up to 7200 s. Internal firmware timing executes ON/OFF state transitions in 8 ms increments with an additional maximum delay of only 1 ms.
Q: What cable assembly is required to connect field wiring to the module front panel?
A: Signal wiring requires a dedicated Yokogawa KS9 cable assembly. This multi-core cable routes all 64 channels directly to external terminal boards designed for ST7 I/O cards.
Q: Can the module be installed in dual-redundant configurations?
A: Yes. Dual ADV569-P00 modules mount into paired FIO slot positions. The host controller automatically synchronizes output states, allowing seamless redundant failover without dropping output contacts.
Field Installation Guidelines
Mount the ADV569-P00 module vertically into an open slot on the Yokogawa FIO base unit. Push the housing firmly until the backplane connector locks into place, then tighten the retaining screws to establish frame grounding.
When routing the dedicated KS9 cable, route field signal lines away from high-voltage motor circuits to limit inductive noise coupling. Ensure that external loads stay strictly within the maximum 30 VDC, 100 mA rating per contact. Verify that flyback suppression diodes are installed across inductive loads like solenoid coils to prevent voltage transients from damaging the transistor output switches.