Yokogawa SDV144-S33 S2 ProSafe-RS Digital Input Module
Manufacturer: Yokogawa
-
Part Number: SDV144-S33 S2
Condition：New with Original Package
Product Type: Digital Input Modules
-
Country of Origin: Japan
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
Yokogawa SDV144-S33 S2 ProSafe-RS Digital Input Module
Configured for discrete field signal processing in Yokogawa ProSafe-RS safety systems, the Yokogawa SDV144-S33 S2 (SDV144 Digital Input Module) provides direct physical/electrical execution. It handles discrete status sensing across 16 channels operating on a 24 VDC external power supply network.
Suffix Breakdown & Model Matrix
| Suffix Code | Description | Technical Details |
|---|---|---|
| SDV144 | Base Model | 16-Channel Digital Input Module |
| -S | Type | Standard Type |
| 3 | Connection / Protection | Pressure Clamp Terminal or MIL Cable Configuration |
| 3 | Environment / Coating | Standard Tropicalization / G3 Conformal Coating Option |
| S2 | Revision | System Hardware Revision S2 |
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | SDV144-S33 S2 |
| Brand | Yokogawa |
| Origin | Japan |
| Weight | 0.44 kg (0.97 lbs) |
| Dimensions | Standard ProSafe-RS Module Dimensions |
| Operating Temp | 0 to 60 deg C |
| Power Consumption | 300 mA at 24 VDC (External Field Supply) |
| Number of Channels | 16 channels |
| Nominal Input Voltage | 24 VDC |
| Channel-to-System Isolation | 1500 VAC for 1 minute |
| External Wiring | Pressure clamp terminal block or MIL cable interface |
Channel-to-Channel Isolation & Galvanic Protection
The SDV144-S33 S2 provides galvanically isolated input processing to shield the internal system bus from field-side voltage transients and noise coupling. Each of the 16 channels evaluates field contact open/close states or proximity switch outputs while maintaining a strict 1500 VAC withstand rating between input terminals and system logic circuits. Integrated filtering algorithms prevent false signal transitions caused by mechanical switch contact bounce, ensuring deterministic logic evaluation within safety-instrumented execution loops.
Frequently Asked Questions
Q: How does the SDV144-S33 S2 handle external power disruptions on the field side?
A: The module isolated input circuit continuously monitors the incoming 24 VDC loop voltage. If loop power drops below acceptable logic thresholds, the module flags channel diagnostic errors to the CPU without causing backplane disruption or system reset.
Q: Can field connections be serviced without disconnecting system power?
A: Yes, the module interface design supports hot-swapping under powered rack conditions, provided field wiring terminal blocks or MIL connectors are safely detached before removing the module card.
Field Installation Guidelines
- Shielding and Grounding: Connect all cable shielding drain wires directly to the cabinet functional earth bus. Ensure single-point grounding at the control panel end to suppress ground loop currents and transient common-mode noise.
- Cable Routing Constraints: Maintain physical separation between 24 VDC field input signal cabling and high-voltage AC power lines. Run input cables in dedicated grounded wiring ducts to reduce electromagnetic interference.
- Terminal Block Assembly: Ensure pressure clamp terminal screws are torqued properly or MIL cable retention latches are locked completely before energizing the 24 VDC loop circuit to prevent signal loss from plant vibration.