Z-7138/3330 HIMA HIMax HIMatrix Plug Module
Manufacturer: HIMA
-
Part Number: Z7138/3330
Condition：New with Original Package
Product Type: LED Cable Plugs
-
Country of Origin: Germany
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
HIMA Z7138/3330 LED Cable Plug Module
Configured for digital output signal transmission in HIMax and HIMatrix safety platforms, the HIMA Z7138/3330 (Z7138/3330 LED Cable Plug) provides direct physical/electrical execution across safety instrumented systems.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | Z7138/3330 |
| Brand | HIMA |
| Origin | Germany |
| Component Type | LED Cable Plug |
| Cable Length | 5 m |
| Connector Configuration | Redundant plug connection |
| Status Diagnostics | Integrated LED channel indicators |
| Shielding | Integral EMI protection braid |
| Weight | 0.3 kg |
| Dimensions | 12 cm x 18 cm x 14.4 cm |
| Operating Temp | -20 deg C to +60 deg C |
| Power Consumption | Passive interconnect assembly |
| Safety Compliance | Compatible with SIL3 architectures |
| Certifications | CE, FCC |
Functional Safety & Fail-Safe Execution Attributes
The assembly incorporates dual-channel redundant plug geometry to uphold high-availability requirement profiles inside triple modular redundancy (TMR) architectures. Integrated channel LEDs offer real-time physical visual feedback directly at the cabinet interface without introducing ground-loop current offsets. Galvanic isolation and continuous metallic shielding protect digital output channels against ambient industrial noise, maintaining deterministic fail-safe state execution under severe electromagnetic field transients.
Frequently Asked Questions
Q: How do the integrated LEDs impact low-voltage safety logic outputs?
A: The diagnostic LED circuit is isolated from primary safety logic loops to prevent signal voltage drops or leakage current from triggering false field-device states.
Q: How does the redundant plug design improve safety loop availability?
A: Dual signal path contacts inside the plug connector maintain circuit continuity even if a single terminal contact experiences mechanical degradation or pin contamination.
Field Installation Guidelines
Perform the following steps during installation and cabinet terminal setup:
- Inspect connector housing, contact pins, and cable outer sheath for mechanical defects prior to mounting.
- Align the redundant plug keyway carefully with the controller socket before pushing the connector home to prevent terminal pin strain.
- Tighten integral plug retention screws to hand-tight torque specifications to preserve IP-rated enclosure sealing.
- Route the 5 m shielded cable through segregated low-voltage wiring ducts, avoiding parallel runs alongside high-voltage AC power lines.
- Terminate the overall cable shield braid to a single-point cabinet ground bus bar to maintain maximum suppression of high-frequency electromagnetic noise.