SE4003S2B1 Emerson Analog Input Module | New & Original Stock
Manufacturer: Emerson
-
Part Number: SE4003S2B1 KJ3222X1-BK1
Condition：New with Original Package
Product Type: Analog Input Modules
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
Emerson SE4003S2B1 DeltaV Series 2 Plus Analog Input Module
Configured for high-density sensor monitoring in Emerson DeltaV Series 2 Plus platforms, the Emerson SE4003S2B1 (SE4003S2B1 8-Channel 4-20 mA Analog Input Card with HART) provides direct physical/electrical execution. It handles signal conversion and digital parameter extraction across eight concurrent field loops, managing current-loop digitization and digital subcarrier data extraction natively on each terminal path.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | SE4003S2B1 |
| Brand | Emerson |
| Origin | USA |
| Weight | 0.399 kg |
| Dimensions | 102 mm x 114 mm x 46 mm |
| Operating Temp | -40 to +70 deg C |
| Power Consumption | Backplane logic bus load dependent |
| Part Number | KJ3222X1-BK1 |
| System Compatibility | Emerson DeltaV Series 2 Plus |
| Input Channels | 8 analog inputs |
| Signal Type | 4-20 mA with HART support |
| Environmental Rating | ISA-S71.04-1985 Class G3 conformal coating |
| Storage Temperature | -40 to +85 deg C |
| Humidity Range | 5% to 95%, non-condensing |
4-20 mA HART Loop Protocol and Channel-to-Channel Isolation
The module architecture pairs an independent analog-to-digital converter with a dedicated digital demodulator on each channel to process the 4-20 mA HART loop protocol layer. This configuration allows simultaneous processing of the analog variable alongside secondary digital variables without signal degradation. Channel-to-channel isolation networks decouple each instrumentation loop, suppressing common-mode voltage anomalies and grounding offsets that manifest across distributed field cabling arrays.
Frequently Asked Questions
Q: How does the module execute physical signal separation for the HART digital subcarrier?
A: Internal bandpass filtering circuitry isolates the low-frequency 4-20 mA DC current from the high-frequency AC frequency-shift keying (FSK) signals of the HART protocol. This hardware separation allows simultaneous execution of analog safety control and digital asset management diagnostic tasks.
Q: What are the electrical containment behaviors of the card during field loop short-circuit faults?
A: Each input channel incorporates independent electronic current-limiting circuitry. If a field instrument or field terminal block experiences a direct short circuit, the card limits the maximum current draw to protect internal trace lines and adjacent channels from structural thermal damage.
Field Installation Guidelines
- Carrier Insertion and Shield Alignment: Align the module onto the standard DeltaV I/O carrier interface, pressing firmly until the dual structural latches click into position. Cable shield braids must terminate directly at the ground bar on the carrier housing to prevent electromagnetic interference from skewing the analog readings.
- Intrinsically Safe Separations: When routing the 4-20 mA cables from Zone 2 hazardous areas, maintain distinct separation profiles from all AC mains power conductors. Field loops must conform to the specific electrical safety documentation parameters regarding capacitance and inductance bounds.
- Terminal Block Torque Limits: Tighten all signal wiring terminals to the manufacturer-specified torque limits. Loose terminations introduce variable resistance into the 4-20 mA current loop, causing measurement calibration drifts and intermittent HART communication drops.