19000-00-95-12-02 Bently Nevada Deep-Mount Monitoring Probe

Product Overview

The Bently Nevada 19000-00-95-12-02 operates as a precision eddy-current proximity transducer designed for non-contact displacement monitoring. This probe tracks shaft vibration and axial position in high-speed rotating assets such as turbines, compressors, and large motors. We supply this unit as 100% Brand New original hardware, engineered to provide high-fidelity data to Bently Nevada Proximitor® sensors. Its specialized 9.5-inch length targets applications requiring extended reach into deep bearing housings or through thick machine casings where standard probes cannot reach.

Part Number Breakdown

• 19000: Proximity Probe Series.

• -00: Agency Approval Option (Standard/None).

• -95: Probe Length Option (9.5 Inches).

• -12: Total Length Option (e.g., 1.2 meters/custom configuration).

• -02: Connector/Exit Option.

Technical Specifications

Engineering Advantages

• Extended Reach for Deep Access: The 9.5-inch probe body solves the engineering challenge of monitoring shafts located deep within machine internals. This extended length allows the sensing tip to reach the target surface through thick insulation or reinforced bearing pedestals without requiring complex mechanical modifications.

• Non-Contact Precision: Utilizing eddy current technology, the probe measures displacement without physical contact. This eliminates mechanical wear on the sensor and ensures the probe does not affect the vibration characteristics of high-speed shafts.

• Industrial-Grade Durability: The probe utilizes high-performance materials resistant to hot lubricating oils, moisture, and chemical contaminants. This ruggedized build prevents signal degradation and physical erosion in the volatile atmospheres typical of refineries and power plants.

• High Vibration Immunity: Bently Nevada engineered the 19000 series to maintain calibration even under extreme mechanical stress. The internal sensing coil remains stable during high-G vibration events, providing reliable data for emergency shutdown systems (ESD) and machinery protection.

• Seamless Proximitor® Integration: The probe delivers a linear voltage output when paired with a compatible Proximitor® sensor. This integration ensures the system accurately reflects true mechanical movement, supporting advanced diagnostics like orbit plots and spectral analysis.

FAQs

• What is the significance of the 9.5-inch length?

  The 9.5-inch dimension refers to the rigid probe body length. This "extended reach" configuration allows the probe to pass through deep mounting holes in large turbine or compressor casings to position the sensing tip within the required gap of the shaft.

• Can I use this probe with any vibration monitor?

  The 19000-00-95-12-02 must interface with a compatible Bently Nevada Proximitor® sensor to convert the eddy current signals into a usable voltage for the monitoring system (such as the 3500 series).

• Does this probe require field calibration?

  While the probe is manufactured to strict tolerances, you must set the physical "gap" (the distance between the tip and the shaft) during installation. This is typically done by monitoring the DC voltage output to ensure it sits in the center of the linear range.

• Is this an original Bently Nevada part?

  Yes. We sell only 100% Brand New, original Bently Nevada 19000-00-95-12-02 units in their original factory packaging to ensure your safety-critical systems remain reliable.